Wirelss Radio Remote Controller
Same function as crane pushubtton, instead of crane pushbutton work with cable, this is wirelss which is more convenient and easily control and install. Controlled by frequency and the distance can reach to 200m wide.
Features:
1. Advance program design, quick and good performance movements.
2. PA transmitter housing. Water, Shock, dust proof
3...Single -Raw button transmitter, compact and lighter design, ensure safe&convenient operation.
4. Random security code up to 4.2 biljions sets, each transmitter has own unique ID code.
5. Receiver with 4 -LED, quick, simple judgement for operation sialus & after service.
2. Models
EUROTRON Q100 1 step(6) buttons+(1)AUX button (momentary)
EUROTRON Q100S 1 step(6) buttons+(1)light button (toggle/latch)
EUROTRON Q100AB 1 step(6) buttons+(1) button for A. B. A+B hoist
EUROTRON Q211 (2)2 step- buttons+(4)1 step-button +(1)AUX button (momentary)
EUROTRON Q112 (4) 1step- buttons+(4)2 step-button +(1)AUX button (momentary)
EUROTRON Q200 2 steps (6) 2 step -button +(1)AUX button (monmentary)
EUROTRON Q200S 2 steps (6) 2 step -button +(1)light button (toggle/lacth)
EUROTRON Q200AB 2 steps (6) 2 step -button +(1)button for A. B. A+B hoist
3. Transmitter
| Operation Distance |
100M |
| Frequency |
FM433MHZ(20HC) FM868MHZ(20HC) |
| Output power |
<=10mW |
| Antenna |
Internal Type |
| Temperature |
0-75degree (without battery inside) |
| Power Supply |
1.5V AA 4pcs |
| Enclosure |
IP65 |
| Consumption |
<17mA (stand by <20mA) |
| Address Code |
4.2 billions set |
| Weight |
235 (excluding battery) |
4. Receiver:
| Sensitivity of RF |
-110dBm |
| Frequency: |
FM433MHZ (20HZ) FM868MHZ(20HZ) |
| Antenna |
Internal Type |
| Temperature |
0-75degree |
| Source Voltage |
AC48V , 110V, 220V |
| Enclosure |
IP65 |
| Consumption: |
<12w |
| Security Code |
4.2 billion sets |
| Weight |
700g (excludng battery) |
| Certificate |
CE , SGS , ISO9001 |
5. Installation Notes:
1. Ensure the orginal wired control of crane works.
2. Shut down crane main power source before installation.
3. Mount in a fimned side where the receiver can be seen easily by operator.
4. Keep away the mounted side from motors relays, cables, high voltage wiring and devices, or the protrusion of building where crane moves, slecta firmed side without metal shield.
5. Do not install the other same channel remote controller within 50M.
6. Ensure the wiring layout correctly and safely \
7. Test each function to be sure each out put has the same function as wired control
8. Put the wired pendant in safe positon.
Audited Supplier 
){kind=link}